Klaus and Massey Ferguson – a Perfect Match

 MF7615 Series surpasses New Zealand Dairy farmer and contractor’s expectations for hedge mulching business. Contractor and dairy farmer Robert Klaus has great partnerships. The first is with his wife Sharon who loves her cows and runs the dairy farm. The second...

Klaus and Massey Ferguson – a Perfect Match

 MF7615 Series surpasses New Zealand Dairy farmer and contractor’s expectations for hedge mulching business. Contractor and dairy farmer Robert Klaus has great partnerships. The first is with his wife Sharon who loves her cows and runs the dairy farm. The second...

 MF7615 Series surpasses New Zealand Dairy farmer and contractor’s expectations for hedge mulching business.

MF7615 series Contractor NZ

Contractor and dairy farmer Robert Klaus has great partnerships.

The first is with his wife Sharon who loves her cows and runs the dairy farm. The second is with Massey Ferguson, and their MF7615 tractor, the backbone of  Robert’s hedge-cutting business.

Robert and Sharon bought their first dairy farm near Matamata. They’d been share milking for seven years, working up to managing a 500-cow herd. Now they have their own property where they milk 150 cows on 52 effective hectares.

It’s a small farm and dairy payouts are looking questionable for this coming season, so it is good Robert has his contracting sideline. Besides he loves machinery.

“I’d been working for a mate who owns a contracting business for the last eight years and I wanted to do something myself. Sharon enjoys milking, and I could see a gap in the market mulching barberry hedges.”

Robert looked at second-hand cutters but couldn’t find anything good enough so he had the local engineers design and build one for him. It’s like a giant mower tilted on its side with two big blades, and a shroud around it. It mulches the hedges and leaves everything tidy.

Robert got the Massey Ferguson 7615 in December from Matamata tractors.

“I needed a six-cylinder machine with a long wheel base because the hedge-cutter is mid-mounted. I got the Dyna-VT variable transmission as it goes down to 0.3 kph. I use it in foot mode. I just take my foot off and it stops. I hardly ever use the brake or clutch. It’s like driving a big forklift.”

The hedge cutter runs off the tractor’s hydraulics and all the operations for the rams on the cutter are controlled from the factory joystick in the cab.

“I saved a lot of money, as I didn’t have to fit an after-market joystick,” Robert says.

The joystick also has a forward/reverse button so he doesn’t have to move his hand during operations. He can constantly look at where he’s going and what the mulcher is doing.

The cutter is mounted on the left side of the tractor, and Robert says it is “a piece of cake getting in and out the right door. In some other brands it was just about impossible to get out.”

There are dual wheels on the cutter side to help balance the weight of the machine.

“I’ve got a bigger footprint on the left side, which makes it more stable. Otherwise, if I hit a hole the cutter would drop when I’m trying to keep the hedge straight.”

He doesn’t fit duals on the right side, as it would make the tractor too wide to get through gateways.

MF7615-Contractor-NZ505x265

The MF 7615 produces 150hp from a Tier 4a AGCO Power SCR engine, which uses AdBlue to minimise toxic emissions.

“It’s no problem. I fill AdBlue every third tank of diesel. It’s got a gauge telling me when its low, and I always keep a bit on hand.”

He says anyone can jump in and drive the tractor. “It’s what I like about them. “They’ve got all the technology but it’s user-friendly. Everything is simply laid out.”

The cab also meets with his approval.

“It’s awesome – comfortable and really quiet. That stood out when I first drove it. People ring me and ask what I’m doing because they can’t even hear the hedge-cutter working.”

Robert says the serviceability is also good. “You don’t have to pop the bonnet to check the oil. And if you need to blow out the radiator, it’s right there and easy to get at.”

The MF 7615 is available in three different specifications: Essential, Efficient and Exclusive. Robert got the Efficient.

He’s had great service from Matamata Tractors.

“When we were building the hedge-cutter they helped the engineer to shift the diesel, hydraulic and AdBlue tanks, and nothing was ever a problem.”

This isn’t Robert and Sharon’s first dealing with Massey Ferguson tractors. They also run a MF5460.

They’ve had the MF 5460 for four years. It’s 120hp with a Dyna-4 transmission.

“I always liked Fergies and Matamata Tractors did a good deal I couldn’t pass up. I just like the tractor. It’s got everything we need but is still basic to operate,” Robert says.

“It’s really reliable and nothing has gone wrong with it. On the big farm it pulled the silage wagon. Now it has an auger bucket for feeding out on a pad. It also does the mowing and all the farm work.

He says both the Fergies are very quiet tractors, with everything well laid out, at your fingertips.

 

Stay Connected. Follow AGCO